RAB 010 Stereo Amplifier Bill of Materials

Costs are for stuff I had to buy (1992 prices); "--" is stuff that was on hand or could be scrounged.
BILL OF MATERIALS -- RAB 010             MAY 2, 1992  R. Booty

POWER SUPPLY GROUP
     1  Transformer, 48 VCT (24/24, 4a ea.)    $ 55.05
        Shipping                                  8.35
     4  Screw #10-32 x 1/2 ph. pan                  --
     8  Washer #10                                  --
     4  Nut #10-32                                  --
     2  Capacitor, 9600 µf, 50v electrolytic     21.60
        Shipping                                  7.42
    ar  RTV silicone                                --
     1  Clamp, capacitor, brass, 1 x 2.3 x .062     --
     1  Carriage bolt 1/4-20 x 5                   .05
     1  Nut 1/4-20                                  --
     2  Ring terminal #10,  8 ga.                   --
     2  Ring terminal #10, 12 ga.                   --
     1  Diode bridge 250 piv, 6a                  2.20
     1  Screw #6-32 x .62 ph. pan                   --
     1  Nut #6-32                                   --
     3  Fuse holder - panel mount                 3.87
     3  Fuse, AGC 8                                .79
    12  ft. wire 18 ga., 16 ga., blk, red, purp     --
     2  LED, red (+ & - pilot ind.)                 --
     2  3.3K resistor, 1/2 w                        --
     2  ft. 22 ga. hook up wire                     --
     1  Ring terminal #10, 16 ga.                   --
     1  Varistor                                  1.99
     1  Power cord, 16 ga.                          --
     1  Bushing, strain relief                     .79
                                                        102.11
AMPLIFIER / HEAT SINK GROUP
     4  Power op-amp, National  LM12CLK         130.43
        Shipping                                  2.87
    ar  Thermal grease                            1.59
     2  Heat sink, aluminum .12 x 4.12 x 16.6       --
     4  Mount, heat sink, Delrin 1.62 x .75 x .5    --
    12  Screw #8-16 x 1/2 ph. pan                  .55
     2  Diode bridge  250 piv, 6a                 4.40
     2  Screw #6-32 x .62 ph. pan                   --
     2  Nut #6-32                                   --
     4  Capacitor, 470 µf, 50v electrolytic       9.07
     4  100K resistor, 1/2 w                       .50
     6  10K  resistor, 1/2 w                       .75
     4  Capacitor, 47pf, 50v, ceramic              .78
     1  ft. 18 ga. buss wire                        --
     4  solder lug  (TO-3, -V)                      --
     8  Screw #6-32 x .5                            --  
    12  Nut #6-32                                   --
     8  Washer, lock, #6                            --
   6.5  ft. 16 ga. enameled wire (4 µH chokes)      --
     4  10 ohm resistor, 1w                        .58
    12  in. insulator sleeve                        --
    ar  Solder, rosin core                          --
                                                        150.74
CASE / CHASSIS GROUP
     1  Base, chassis, 16 x 16.56 x 18 ga. steel    --
     1  Top, chassis,   7 x 26.62 x 18 ga. steel    --
     2  Stiffener, chassis, 5 in.                   --
     3  Stiffener, chassis, 1.5 in.                 --
    18  Pop rivet, 1/8 in., steel                   --
     9  Screw #8-16 x 1/2 x ph. pan                .55
     3  Spacer, .20 x .50 x .56 (top & ht. sink)    --
     2  Screw #8-16 x 1.00 ph. pan (top)           .55
     1  Screw #10-32 x 1.00 ph. pan (ht. sink)      --
     1  Nut #10-32 (ht. sink)                       --
     1  Ground buss, brass, 1.25 x 7.25 x .062      --
     2  Screw #10-32 x 1/2 ph. pan                  --
     4  Washer, lock, #10                           --
     3  Nut #10-32, brass                           --
     4  Feet, rubber, self-stick                  1.50
     2  Phono jack, input                         2.20
     2  Potentiometer, 100K, input atten.         2.38
     2  pair Binding post, output                 3.20
    18  Cable tie, Nylon                            --
     1  Can paint, spray, primer                  2.75
     1  Can paint, spray, satin black             2.75
     3  ft. label tape, satin black                 --
                                                         15.88
                                              ----------------
TOTAL                                                 $ 268.73

| View JPEG images of a completed unit | View schematic diagram (24K GIF) |

Valid HTML 4.01
Last tinkered with October 3, 2005 - R. A. Booty
Return to Bob's Audio Index.